Our team completed another repair using COMPA technology onboard Ro-Ro ship during its stay in the port Antwerp. This time, the request was to seal three cracks with various length located longitudinal on the H.F.O. double bottom tank. The cracks were successfully covered and reinforced with the COMPA Repairs patches.
Category Archives: Repairs
28
May
May
We had another busy month applying COMPA Repairs technology. The latest repair was conducted during the vessel’s stay in Antwerp port, without creating any delays for a shipping company. Leaking main sea water pipe with a ⌀ 2,5cm crack needed fast and durable repair solution. To reinforce the pipe and achieve watertightness, our experts applied […]
08
Apr
Apr
Our highly experienced COMPA team performed an extensive repair on-board a Ro-Ro vessel during a four-day voyage from Germany to Belgium. Multiple damage locations were identified on the double bottom deck caused by cargo operations. Heavy fuel and ballast were found to be leaking on top of the deck. COMPA engineers made the detailed plan, […]
21
Jan
Jan
Another sea water pipe repair was completed using COMPA Repairs service. The purpose of the repair was to prevent a leakage in the engine room caused by three corrosive holes on the sea water pipe T-junction. The holes on the pipe were sealed and the composite patch was applied using the hand lay-up technique. Ro-Ro/Passenger […]
03
Dec
Dec
Respecting all precautions related to the COVID-19 situation, the COMPA repair team responded to the client’s emergency call. According to the detailed repair plan made by our engineers, COMPA technicians reinforced damaged doubler plates on the double bottom above the ballast and oil tanks. The repair was completed within 12 hours in between phases of cargo […]
26
Oct
Oct
We completed yet another repair in just four hours while Ro-Ro/Passenger ship was in the port in south Italy. Well trained technicians applied composite patch technology and successfully stopped the leakage on a cracked HFO bulkhead. The ship managed to continue its usual operations without any setbacks. For more information and insight into other COMPA Repair cases, […]
12
Oct
Oct
Second phase of the C2GO EU project is completed – COMPA qualification plan has been approved and we are more than ready for the final evaluation.
19
Jun
Jun
The repair was carried out on the mechanically damaged mast of a sailboat in Kaštela, Croatia.The mast made of carbon fibre, with the approximate cross-section dimensions of 175×106, was repaired according to the calculations made by the eCOMPA software. A 400 mm patch applied using vacuum bagging technique covered the damage and successfully prolonged the […]
10
Mar
Mar
Acidic medium caused the crack and the leakage of the flange of the process tank that is a part of the scrubber system. The vehicle carrier needed a fast and long-term repair solution without any setbacks or delays during its usual operations in Civitavecchia port. To reinstate watertightness, this time COMPA Repairs team applied the […]
02
Mar
Mar
COMPA Repairs technical team performed another repair on board Ro-Ro/Container carrier. Two cracks of about 30 cm in length were repaired on the double bottom plating just above HFO tank. Applied composite patch successfully stopped leakage and ensured tightness within only four hours. This quick repair enabled the crew to load containers and depart from the port […]
- 1
- 2